WURTH Diesel Particulate Filter Cleaner – 400 ML

Cleaning agent for the removal of carbon and ash deposits from diesel particulate filters located within the exhaust system.

Loosens and removes carbon deposits in particulate filters.

Removal of the DPF (Diesel Particulate Filter) is not necessary for cleaning.

WURTH Diesel Particulate Filter Cleaner – 400 ML

Saves money, as a new particulate filter may not need to be installed (this depends on the condition of the particulate filter).

Non-flammable

Neutral ash and metal-free formula

Evaporates without leaving residue behind.

Area of Use:

Used to remedy reductions in performance and malfunctions caused by soiled diesel particulate filters. Cleaning restores the full flow capacity of the filter. The EGR valve can also be cleaned with the product.
WURTH Diesel Particulate Filter Cleaner – 400 ML

Application:

Remove the temperature or pressure sensor. Insert the tube through the opening which has been made and empty in the direction of the particulate filter via spraying. Regeneration must then be initiated manually by the tester or by taking a test drive. After regeneration, query the error memory and clear any errors which may be present. One can is sufficient for a particulate filter on a standard vehicle. Two cans are recommended for large truck filters.

This advice is based on our own research and experience. It is presented in good faith and may be considered reliable. However, due to the diverse processing, application, and handling possibilities, the information provided may not be considered legally binding. The same applies to the information provided by our technical and commercial customer service.

We recommend the users of our products perform their own tests in order to determine whether our products are appropriate for their respective use and environment. We guarantee the consistent quality of our products. We reserve the right to implement technical changes and improvements.

Technical Data:

Color: Pink

Scent: Aminic

Density at 20°C: 1.010 g/cm3

pH value: 11.47

Note:

Do not apply to a hot exhaust system. The maximum temperature for application is 122°F (50°C).